IPSLA esempio configurazione Junos (router T series)

28.02 2024 | by massimiliano

---

Un sistema di Real-Time Performance Monitoring (RPM) che le permette di misurare le performance tra due peer endpoints. Quando un […]

Un sistema di Real-Time Performance Monitoring (RPM) che le permette di misurare le performance tra due peer endpoints.

Quando un RPM è configurato il nodo calcola le performance di rete basandosi sul tempo di risposta del peer endpoint, come pure per jitter e packet-loss attraverso ICMP request probe.

Si riporta la configurazione esempio di un RPM attivato a livello P_router T1600 Juniper:

set services rpm probe IPSLA test SLAASR9K-CORE-2 probe-type icmp-ping

set services rpm probe IPSLA test SLAASR9K-CORE-2 target address <ip_peer>

set services rpm probe IPSLA test SLAASR9K-CORE-2 probe-count 1

set services rpm probe IPSLA test SLAASR9K-CORE-2 probe-interval 1                                   

set services rpm probe IPSLA test SLAASR9K-CORE-2 test-interval 1

set services rpm probe IPSLA test SLAASR9K-CORE-2 source-address <ip_source>

set services rpm probe IPSLA test SLAASR9K-CORE-2 thresholds rtt 35000

!

set services rpm probe IPSLA test SLAASR9K-CORE-1 probe-type icmp-ping

set services rpm probe IPSLA test SLAASR9K-CORE-1 target address <ip_peer>

set services rpm probe IPSLA test SLAASR9K-CORE-1 probe-count 1

set services rpm probe IPSLA test SLAASR9K-CORE-1 probe-interval 1

set services rpm probe IPSLA test SLAASR9K-CORE-1 test-interval 1

set services rpm probe IPSLA test SLAASR9K-CORE-1 source-address <ip_source>

set services rpm probe IPSLA test SLAASR9K-CORE-1 thresholds rtt 35000