L2vpn virtual-switch bridge-domain and aggregate-ethernet interface on juniper devices
16.12 2019 | by massimilianoConfigurazione Juniper per L2VPN virtual-switch, bridge-domain and L2 aggregate-ethernet interface in un ambiente Data Centers: CONFIGURATION: set chassis […]
https://www.ingegnerianetworking.com/wp-content/uploads/2019/12/virtual-switch-junos-c07.png
Configurazione Juniper per L2VPN virtual-switch, bridge-domain and L2 aggregate-ethernet interface in un ambiente Data Centers:
CONFIGURATION:
set chassis aggregated-devices ethernet device-count 10
!
set interfaces ae1 description “to MX960 Juniper”
set interfaces ae1 flexible-vlan-tagging
set interfaces ae1 encapsulation flexible-ethernet-services
set interfaces ae1 aggregated-ether-options link-speed 10g
set interfaces ae1 aggregated-ether-options lacp active
!
!
set interfaces xe-2/2/0 description “to MX960 Juniper if-a”
set interfaces xe-2/2/0 gigether-options 802.3ad ae1
set interfaces xe-3/3/0 description “to MX960 Juniper if-b”
set interfaces xe-3/3/0 gigether-options 802.3ad ae1
!
set interfaces ae1 unit x encapsulation vlan-bridge
set interfaces ae1 unit x vlan-id x
set interfaces ae1 unit 1 family bridge
set interfaces ae1 unit x description “to MX960”
!
!
set routing-instances VSWITCH_CLIENTE instance-type virtual-switch
set routing-instances VSWITCH_CLIENTE bridge-domains VLAN-Y interface ae3.y
set routing-instances VSWITCH_CLIENTE bridge-domains VLAN-Y interface ae4.y
set routing-instances VSWITCH_CLIENTE bridge-domains VLAN-W interface ae2.w
set routing-instances VSWITCH_CLIENTE bridge-domains VLAN-W interface ae4.w
set routing-instances VSWITCH_CLIENTE bridge-domains VLAN-X interface ae2.x
set routing-instances VSWITCH_CLIENTE bridge-domains VLAN-X interface ae1.x
NOTA:
la configurazione per le interfacce fisiche di collegamento verso i firewalls, bilanciatori e switch di accesso hanno gli stessi steps di configurazione previsti sopra, applicate alle interface aggregate ethernet ae2, ae3 ed ae4.