example config on CRS cisco to fast-convergency timers with bfd throttling and mpls-te
17.12 2019 | by massimilianoEsempio di configurazione router ospf per un CRS cisco di enable BFD, OSPF Convergency and mpls traffic engineering ARCHITETTURA […]
https://www.ingegnerianetworking.com/wp-content/uploads/2019/12/ospf-crs-fast-convergency-design-backbone-960.png
Esempio di configurazione router ospf per un CRS cisco di enable BFD, OSPF Convergency and mpls traffic engineering
ARCHITETTURA DI ESEMPIO
CRS CONFIG:
router ospf 300
nsr # no-stop routing
log adjacency changes
router-id 10.54.0.224
bfd minimum-interval 200 # è l’intervallo di tempo in msec per la trasmissione packet bfd al suo peer
bfd multiplier 3 # il numero consecutivo di packet bfd prima di dichiarare out il peer
bfd timers throttle lsa all 10 100 5000 # tempi di propagazione evento fault in msec lsa/lsp flooding
timers throttle spf 10 100 5000 # tempi di ricalcolo shortest path first in msec in caso di change topology
auto-cost reference-bandwidth 100000 # ip ospf cost 1 è associato ad una 100GE link.; 10 to 10GE
address-family ipv4 unicast
area 0
mpls traffic-eng
interface Bundle-Ether1
!
interface Loopback0
passive enable
!
interface TenGigE0/0/0/0
bfd fast-detect
!
interface TenGigE0/0/0/2
bdf fast-detect
!
interface TenGigE0/0/0/3
bfd fast-detect
!
interface TenGigE0/2/0/0
bfd fast-detect
!
interface TenGigE0/2/0/2
bfd fast-detect
!
mpls traffic-eng router-id Loopback0