failover asa cisco config

Home » Blog » Application » clustering and upgrade hw-sw » firewall » failover asa cisco config

failover asa cisco config

14.11 2019 | by massimiliano

EXAMPLE FAILOVER ASA CISCO CONFIG   ASA-1   eth1/12 description FAILOVER-ASA ! failover failover lan unit primary failover lan interface […]


https://www.ingegnerianetworking.com/wp-content/uploads/2019/11/asa-failover-37d-1.png

EXAMPLE FAILOVER ASA CISCO CONFIG

 

ASA-1

 

eth1/12

description FAILOVER-ASA

!

failover

failover lan unit primary

failover lan interface FAILOVER Ethernet1/12

failover polltime unit msec 200 holdtime msec 800

failover polltime interface 1 holdtime 5

failover interface ip FAILOVER 1.1.1.1 255.255.255.252 standby 1.1.1.2

 

ASA# show failover

Failover On

Failover unit Primary

Failover LAN Interface: FAILOVER Ethernet 1/12 (up)

Unit Poll frequency 200 milliseconds, holdtime 800 milliseconds

Interface Poll frequency 1 seconds, holdtime 5 seconds

Interface Policy 1

Monitored Interfaces 3 of 1043 maximum

MAC Address Move Notification Interval not set

Version:

Serial Number:

Last Failover at: time UTC date

   

This host: Primary – Standby Ready

     Active time: (sec)

    slot 0: FPR-2130 hw/sw rev () status (Up Sys)

        Interface outside (ip address) : Normal (Monitored)

        Interface inside (ip address) : Normal (Monitored)

        Interface management (ip address) : Normal (Monitored)

 

Other host: Secondary – Active

    Active time: (sec)

    slot 0: FPR-2130 hw/sw rev () status (Up Sys)

        Interface outside (ip address) : Normal (Monitored)

        Interface inside (ip address) : Normal (Monitored)

        Interface management (ip address) : Normal (Monitored)

 

 

ASA-2

 

eth1/12

description FAILOVER-ASA

!

failover

failover lan unit secondary

failover lan interface FAILOVER Ethernet1/12

failover polltime unit msec 200 holdtime msec 800

failover polltime interface 1 holdtime 5

failover interface ip FAILOVER 1.1.1.1 255.255.255.252 standby 1.1.1.2

 

 

ASA# show failover

Failover On

Failover unit Secondary

Failover LAN Interface: FAILOVER Ethernet 1/12 (up)

Unit Poll frequency 200 milliseconds, holdtime 800 milliseconds

Interface Poll frequency 1 seconds, holdtime 5 seconds

Interface Policy 1

Monitored Interfaces 3 of 1043 maximum

MAC Address Move Notification Interval not set

Version:

Serial Number:

Last Failover at: time UTC date

   

This host: Secondary – Active

     Active time: (sec)

    slot 0: FPR-2130 hw/sw rev () status (Up Sys)

        Interface outside (ip address) : Normal (Monitored)

        Interface inside (ip address) : Normal (Monitored)

        Interface management (ip address) : Normal (Monitored)

 

Other host: Primary – Standby Ready

    Active time: (sec)

    slot 0: FPR-2130 hw/sw rev () status (Up Sys)

        Interface outside (ip address) : Normal (Monitored)

        Interface inside (ip address) : Normal (Monitored)

        Interface management (ip address) : Normal (Monitored)

 

 

 

 

 

 

 

 

Torna in alto