IPSLA esempio di configurazione RPM in router cisco e juniper
02.03 2022 | by massimilianoIPSLA RPM esempio di configurazione in router cisco e juniper Real-Time Performance Monitoring (RPM) è un sistema che le […]
IPSLA RPM esempio di configurazione in router cisco e juniper
Real-Time Performance Monitoring (RPM) è un sistema che le permette di misurare le performance tra due peer endpoints.
Quando un RPM è configurato il nodo calcola le performance di rete basandosi sul tempo di risposta del peer endpoint, come pure per jitter e packet-loss attraverso ICMP request probe.
Si riporta la configurazione esempio di un RPM attivato a livello P_router T1600 Juniper:
set services rpm probe IPSLA test SLAASR9K-2 probe-type icmp-ping
set services rpm probe IPSLA test SLAASR9K-2 target address 10.10.17.237
set services rpm probe IPSLA test SLAASR9K-2 probe-count 1
set services rpm probe IPSLA test SLAASR9K–2 probe-interval 1
set services rpm probe IPSLA test SLAASR9K-2 test-interval 1
set services rpm probe IPSLA test SLAASR9K-2 source-address 10.10.17.238
set services rpm probe IPSLA test SLAASR9K-2 thresholds rtt 35000
!
set services rpm probe IPSLA test SLAASR9K-1 probe-type icmp-ping
set services rpm probe IPSLA test SLAASR9K-1 target address 10.10.17.233
set services rpm probe IPSLA test SLAASR9K-1 probe-count 1
set services rpm probe IPSLA test SLAASR9K-1 probe-interval 1
set services rpm probe IPSLA test SLAASR9K-1 test-interval 1
set services rpm probe IPSLA test SLAASR9K-1 source-address 10.10.17.234
set services rpm probe IPSLA test SLAASR9K-1 thresholds rtt 35000
Sulla base di questa configurazione Junos, andiamo ad applicare le stesse logiche sugli ASR9910 P_router:
DESTINATION NODE:
ipsla
responder
SOURCE NODE:
ipsla operation 10
type icmp-echo
destination address <peer-endpoint>
frequency 1
datasize request 36
timeout 35
exit
ipsla schedule operation 10
life forever
start-time now