lacp tra MX960 e vpc Nexus in fabric-path domain
13.12 2019 | by massimilianoCollegamento LACP tra due MX960 Juniper e due Nexus Cisco in FabricPath domain: MX960-1: set interfaces ae2 […]
https://www.ingegnerianetworking.com/wp-content/uploads/2019/12/lacp-vpc-mx960-nexus-fabricpath-3db.png
Collegamento LACP tra due MX960 Juniper e due Nexus Cisco in FabricPath domain:
MX960-1:
set interfaces ae2 description “vPC multi-chassis to Nexus”
set interfaces ae2 flexible-vlan-tagging
set interfaces ae2 encapsulation flexible-ethernet-services
set interfaces ae2 aggregated-ether-options link-speed 10g
set interfaces ae2 aggregated-ether-options lacp active
!
set interfaces xe-1/1/0 gigether-options 802.3ad ae2
set interfaces xe-3/1/0 gigether-options 802.3ad ae2
MX960-2:
set interfaces ae3 description “vPC multi-chassis to Nexus”
set interfaces ae3 flexible-vlan-tagging
set interfaces ae3 encapsulation flexible-ethernet-services
set interfaces ae3 aggregated-ether-options link-speed 10g
set interfaces ae3 aggregated-ether-options lacp active
!
set interfaces xe-1/1/0 gigether-options 802.3ad ae3
set interfaces xe-3/1/0 gigether-options 802.3ad ae3
NEXUS-1:
fabricpath domain default
!
install feature-set fabricpath
feature-set fabricpath
!
cfs eth distribute # cisco fabric services
feature interface-vlan
feature lacp
feature vpc
feature lldp
feature vtp
feature fex
!
vtp mode transparent
!
spanning-tree vlan < range value vlan-id > priority 8192 (n.b. tutte le vlan debbono avere lo stesso valore di priority)
!
vpc domain 1
role priority 1
peer-keepalive destination a.b.c.x source a.b.c.y
peer-gateway
fabricpath switch-id 1
!
interface port-channel1
description peer-link
switchport mode fabricpath
vpc peer-link
!
interface port-channel2
description to MX960-01
switchport mode trunk
switchport trunk allowed < range value vlan-id >
vpc 2
!
interface port-channel3
description to MX960-02
switchport mode trunk
switchport trunk allowed vlan < range value vlan-id >
vpc 3
!
interface Ethernet1/1
description to MX960-01
switchport mode trunk
switchport trunk allowed vlan < range value vlan-id >
channel-group 2 mode active
!
interface Ethernet1/2
description to MX960-02
switchport mode trunk
switchport trunk allowed vlan < range value vlan-id >
channel-group 3 mode active
!
interface Ethernet1/47
description B2B Nexus-2
switchport mode fabricpath
channel-group 1 mode active
!
interface Ethernet1/48
description B2B Nexus-2
switchport mode fabricpath
channel-group 1 mode active
NEXUS-2:
fabricpath domain default
!
install feature-set fabricpath
feature-set fabricpath
!
cfs eth distribute à (CISCO FABRIC SERVICES)
feature interface-vlan
feature lacp
feature vpc
feature lldp
feature vtp
feature fex
!
vtp mode transparent
!
spanning-tree vlan < range value vlan-id > priority 8192 (n.b. tutte le vlan debbono avere lo stesso valore di priority)
!
vpc domain 1
role priority 1
peer-keepalive destination a.b.c.y source a.b.c.x
peer-gateway
fabricpath switch-id 1
!
interface port-channel1
description peer-link
switchport mode fabricpath
vpc peer-link
!
interface port-channel2
description to MX960-01
switchport mode trunk
switchport trunk allowed < range value vlan-id >
vpc 2
!
interface port-channel3
description to MX960-02
switchport mode trunk
switchport trunk allowed vlan < range value vlan-id >
vpc 3
!
interface Ethernet1/1
description to MX960-01
switchport mode trunk
switchport trunk allowed vlan < range value vlan-id >
channel-group 2 mode active
!
interface Ethernet1/2
description to MX960-02
switchport mode trunk
switchport trunk allowed vlan < range value vlan-id >
channel-group 3 mode active
!
interface Ethernet1/47
description B2B Nexus-2
switchport mode fabricpath
channel-group 1 mode active
!
interface Ethernet1/48
description B2B Nexus-2
switchport mode fabricpath
channel-group 1 mode active